HP 20-700 Manuale Utente

Chapter 4

Operating in Automated Mode 105

Chapter 4

Importing Cleaning Cartridges through the CAP

Note

This procedure assumes that you have enabled the Auto Clean

function by:

■

Loading cleaning cartridges into the reserved cells

■

Resetting the library once the cleaning cartridges are loaded

When you want to import cleaning cartridges through the CAP into the

reserved cells:
1. Press the [CAP] button on the operator panel to open the CAP.

The Open indicator will light.

Caution

Possible halt to operation or damage to components. You must

enter the cartridges properly, or else you might damage the

robot or the drive or cause the library to stop operating. Use

only cartridges designed for your type of drives.

2. Load cartridges into the magazine.

You can do this one of two ways:
a. Pull out and down on the magazine handle.
b. Remove the magazine by lifting it out (see

Note

You can use the snap-on retention cartridge cover to keep

cartridges in place when carrying the magazine. Remove the

clear cover from the back of the magazine by lifting the side

edge. To protect the cartridges, place the slots on one edge of

the cover into the grooves on the side of the magazine’s top

panel and snap the other edge into place.

3. Enter the cartridges into the magazine so that they lie flat, with the

VOLSER label facing toward you, the customer label facing down, and the

reel facing away from you. (See