HP 20-700 Manuale Utente
Chapter 3
Entering Configuration Data 87
Chapter 3
Screen Characteristics
You also can change the operator panel’s screen characteristics from the main
Configuration Menu. The screen characteristics are saved in non-volatile
memory.
To change the contrast and backlight (or brightness) of the operator panel
To change the contrast and backlight (or brightness) of the operator panel
screens:
1. At the Main Configuration Menu, press an arrow button until the cursor
1. At the Main Configuration Menu, press an arrow button until the cursor
underscores DISPLAY INFO.
2. Press
the
[SELECT] button. The Display Info Menu will appear.
3. Press the arrow buttons to line up with the desired screen characteristic:
CONTRAST or BACKLIGHT.
An editing screen will appear.
An editing screen will appear.
4. Press the up and down arrow buttons to change the count value.
Note
To reset the screen characteristics to the default values, line up
the cursor with RESTORE DEFAULTS and press the [SELECT]
button.
5. Press
the
[SELECT] button to save the changes. (You may press the [MENU]
button to abort.)
6. If you have already changed the library’s SCSI ID and are planning to exit
the main Configuration Menu at this time, you must press the [RESET]
button. If you try to exit the main configuration menu, a message will
appear requesting that you reset the library.
If you have not changed the library’s SCSI ID, you may exit the
If you have not changed the library’s SCSI ID, you may exit the
configuration menu to do other tasks.