HP 20-700 Manuale Utente

88 Entering Configuration Data

Chapter 3

Cleaning Cartridge Warning Count

Note

For cleaning cartridge information specific to your drive type,

see

After a predetermined count, a cleaning cartridge must be replaced.

Note

The Auto Clean feature is automatically enabled if you insert

even one cleaning cartridge into the reserved cell area and then

reset the library.

If the Auto Clean feature is enabled, use the operator panel to set the

maximum number of times a cleaning cartridge can be used (see

Note

With 3.00 firmware and higher, an asterisk (*) may appear on

the operator panel display. For example, HP A5597A (Code

3.00.xx)*. The asterisk (*) denotes the cleaning cartridge’s life

has expired. To determine which cartridge has expired and to

eject the expired cartridge, see

Exporting Data Cartridges

Table 5

Cleaning Cartridge Warning Counts

Cleaning Cartridge Type

Recommended Warning Counts

(maximum)

LP LTO Ultrium

15 uses

LP LTO Ultrium

(universal)

50 uses

DLT 8000

20 uses

9840

100 uses