HP 5000c-ct Manuale Utente
27
Hard Disk Drive
(End User Replaceable)
(End User Replaceable)
The Hard Disk Drive Module is user replaceable.
Caution: Handle the hard disk drive only by its edges to avoid damage from electrostatic
discharge.
discharge.
To remove the Hard Disk Drive Module, remove the screw under the latch on the hard drive. Push the
Hard Drive Module Forward - do not pull on the latch - it is not strong enough, use the back edge of
the module in front of the depression in the bottom case instead.
Hard Drive Module Forward - do not pull on the latch - it is not strong enough, use the back edge of
the module in front of the depression in the bottom case instead.
Reverse the procedure for installation. To ensure proper pin placement, hold the Hard Disk Drive by
the sides, being careful not to touch the pins. Turn the OmniBook on its backplane (where all the ports
are) and place the hard drive into the slot and allow gravity to drop the drive down the remaining
distance into the slot. The pins will line up and a small push thereafter will ensure it is seated
correctly.
the sides, being careful not to touch the pins. Turn the OmniBook on its backplane (where all the ports
are) and place the hard drive into the slot and allow gravity to drop the drive down the remaining
distance into the slot. The pins will line up and a small push thereafter will ensure it is seated
correctly.
Figure 3 - Hard Disk Drive