HP 5000c-ct Manuale Utente
29
Icon Assembly and Display Module
(HP Authorized Service Providers Only)
(HP Authorized Service Providers Only)
To remove the display module and/or Icon Assembly on the OmniBook 5000C, CT, and CTS turn the
unit over, raise the feet, and withdraw the two Phillips screws from under the feet in the bottom back
corners of the unit (see illustration below).
unit over, raise the feet, and withdraw the two Phillips screws from under the feet in the bottom back
corners of the unit (see illustration below).
Turn the unit right side up and dislodge the Icon assembly by placing the thumbs on each edge of the
assembly and pushing lightly (see illustration below). The front edge of the Icon Assembly will lift up
slightly
assembly and pushing lightly (see illustration below). The front edge of the Icon Assembly will lift up
slightly
Display/Chassis
Screw (2)
Screw (2)
Figure 4 - Display Screws