HP color laserjet 3000n Manuale Utente
ENWW
5-3
To manually access TCP/IP parameters
1
Press (select button) on the LCD control panel to enter
the menus.
the menus.
2
Press
(down arrow button) to highlight
CONFIGURE DEVICE
,
and then press (select button).
3
Press
(down arrow button) to highlight
I/O
, and then press
(select button).
4
Press
(down arrow button) to highlight
EIO X
(where X = 1 or 2),
and then press
(select button).
5
Press
(down arrow button) to select the parameter you want to
configure, and then press
(select button).
6
Press
(down arrow button) or
(up arrow button) to highlight
the option you want to select, and then press (select button).
7
To configure other parameters, press
(back button) repeatedly to
return to the
CONFIGURE DEVICE
menu, and then repeat steps 1
through 6.
-Or-
To return to the
READY
state, press
(pause/resume button).
8
Repeat steps 3-7 to configure other parameters.
Setting the link speed
By factory default, the link speed is set to
AUTO
. Use the following
procedure to set a specific speed and communication mode.
To set the link speed
1
Press (select button) on the LCD control panel to enter
the menus.
the menus.
2
Press
(down arrow button) to highlight
CONFIGURE DEVICE
,
and then press (select button).
3
Press
(down arrow button) to highlight
I/O
, and then press
(select button).
4
Press
(down arrow button) to highlight
EIO X
(where X = 1 or 2),
and then press (select button).
5
Press
(down arrow button) to highlight
LINK SPEED
, and then
press (select button).