HP color laserjet 3000n Manuale Utente
5-4
ENWW
6
Press
(down arrow button) or
(up arrow button) to highlight
the desired link speed, and then press
(select button).
7
To return to the
READY
state, press
(
pause/resume button).
Disabling network protocols (optional)
By factory default, all supported network protocols are enabled.
Disabling unused protocols has the following benefits:
Disabling unused protocols has the following benefits:
z
It decreases printer-generated network traffic.
z
It prevents unauthorized users from printing to the printer.
z
It provides only pertinent information on the configuration page.
z
It allows the LCD control panel to display protocol-specific error and
warning messages.
warning messages.
To disable network protocols
Note
Do not disable the IPX/SPX protocol if Windows 98, Windows NT,
Windows Millennium Edition, Windows 2000, or Windows XP users
will be printing to the printer.
Windows Millennium Edition, Windows 2000, or Windows XP users
will be printing to the printer.
1
Press (select button) on the LCD control panel to enter
the menus.
the menus.
2
Press
(down arrow button) to highlight
CONFIGURE DEVICE
,
and then press (select button).
3
Press
(down arrow button) to highlight
I/O
, and then press
(select button).
4
Press
(down arrow button) to highlight
EIO X
(where X = 1 or 2),
and then press
(select button).
5
Press
(down arrow button) to highlight the network protocol you
want to disable, and then press
(select button).
6
Press
(down arrow button) to highlight
ENABLE
, and then press
(select button).
7
Press
(down arrow button) to highlight
OFF
, and then press
(select button).
8
Press
(
pause/resume button) to return to the
READY
state.