HP color laserjet 2550 series Manuale Di Servizio
6. Unplug the remaining 24 cable connectors, and then remove the two screws (callout 5)
at the bottom of the dc controller before removing two screws (callout 6) at the top of the
dc controller.
dc controller.
1
3
2
5
4
6
7
Figure 5-14.
Removing the dc controller
7. Lift the dc controller up and then away from the printer.
Reinstallation tip
The connection that remains empty upon reinstallation is shown in callout 7 in
. The connection is used to "flash" the dc controller.
Optional tray 2 (250-sheet tray)
1. Remove the Right- and left-side covers (see
).
2. If optional tray 3 is installed, lift the printer (and optional tray 2) up and away from
optional tray 3.
118
Chapter 5 Removal and replacement
ENWW