HP color laserjet 2550 series Manuale Di Servizio
2. Remove one screw (callout 1) from the separation pad assembly, and then remove the
separation pad assembly.
1
Figure 5-34.
Removing the tray 1 separation pad assembly
Gear assembly
1. Remove the following covers and assembly:
●
Right- and left-side covers (see
)
●
)
●
Formatter cage (see
)
●
Back cover (see
●
Top cover (see
)
2. Disconnect one connector (callout 1, hidden, is the connector to the main motor).
3. Disconnect two connectors (callout 2) from the dc controller.
Note
The dc controller has been removed from the printer in
. If it were not, then the connectors in callout 2 would still be attached to the
dc controller.
Reinstallation tip
The connectors in callout 2 can become lost behind the dc controller upon reinstallation
of the dc controller.
of the dc controller.
136
Chapter 5 Removal and replacement
ENWW