HP color laserjet 9500mfp Manuale Utente

colors before printing so that the color of images displayed on the screen more closely match the
color of images when printed. The following options are available:

■

ICM Method. The ICM Method setting specifies how to print your color graphics.

■

To enable Image Color Management, click on the option and then select ICM Enabled.

■

If you want the calculations for color matching to be performed on the host computer before
it sends the document to the product, click ICM Handled by Host System.

■

If you want the calculations for color matching to be performed on your product, click ICM
Handled by Printer. In this case, a set of rules for mapping the colors will be created and
downloaded to the product. The product will use these rules to adjust colors in the document.

■

If you want the calculations for color matching to be performed on product, click ICM
Handled by Printer using printer calibration. In this case, the set of rules for mapping the
colors has already been downloaded to the product (which must be postscript language level
2 or higher), so they will not be created or downloaded again.

■

ICM Intent.The ICM Intent setting specifies how color images are created to produce the best
looking image on the printed page.

■

If you are printing a chart or using fully saturated, bright colors, it is best to click Graphics.

■

For photographs or pictures where the colors blend together, click Pictures to maximize the
contrast.

■

If your document uses a color that you need to match exactly, and you are sending the
document to a product that has that specific color of ink, click Proof.

■

If you want to preview the color settings from another product, click Match.

Use Substitute with Device Font (the default setting) for printing documents that contain TrueType
fonts using equivalent printer fonts. This will permit faster printing; however, you might lose special
characters that the printer font does not support. Select Download as Softfont to download
TrueType fonts for printing instead of using printer fonts.

The Document Options setting contains the following controls:

■

■

When the Advanced Printing Features setting is Enabled, metafile spooling is turned on and
Finishing tab options such as Page Order, Booklet Layout, and Pages per Sheet are available,
depending on your product. For normal printing, leave the Advanced Printing Features setting at
the default (Enabled). If compatibility problems occur, you can disable the feature. However, some
advanced printing features might still be available in the print driver, even though they have been
disabled. If you select an advanced printing feature in the print driver that has been disabled on the
Advanced tab, the feature is automatically re-enabled.

182

4 HP PCL 6, HP PCL 5, and HP PS emulation unidrivers for Windows