HP color laserjet 9500mfp Manuale Utente
Use the Raster Compression feature to select the graphics compression method:
■
Automatic. The software determines the best compression method to use.
■
Best Quality. Forces the software to use a lossless compression method. (Lossless means that
no data is lost during compression.)
no data is lost during compression.)
■
Maximum Compression. Where applicable, requires the software to always use a lossy
compression method (some data is lost).
compression method (some data is lost).
Print on Backside
The Print on Backside feature is Off by default. When On is selected, this option reduces the amount
of paper curl when both sides of a page are printed.
of paper curl when both sides of a page are printed.
Alternative Letterhead Mode
The Alternative Letterhead Mode feature is Off by default. When this feature is selected, you can
load letterhead or preprinted paper the same way for all print jobs, whether you are printing on one
side of the sheet or on both sides of the sheet.
load letterhead or preprinted paper the same way for all print jobs, whether you are printing on one
side of the sheet or on both sides of the sheet.
Load the paper as you would when printing on both sides. See the user documentation that came
with the printer for instructions about loading letterhead for printing on both sides. If the printer tray
has an icon that indicates to load the paper either face-up or face-down, load the paper in the
opposite direction from the orientation shown. When this option is selected, the printer speed slows
to the speed that is required for printing on both sides.
with the printer for instructions about loading letterhead for printing on both sides. If the printer tray
has an icon that indicates to load the paper either face-up or face-down, load the paper in the
opposite direction from the orientation shown. When this option is selected, the printer speed slows
to the speed that is required for printing on both sides.
NOTE
Alternative Letterhead Mode will only work ly if the printer is equipped with an
automatic duplexing unit.
Layout Options
The Layout Options setting contains the following control:
■
Page Order
Page Order
Page Order specifies the order in which the pages of your document are printed. Front to Back
prints the document so that page 1 prints first. Back to Front prints the document so that page 1
prints last. The Back to Front setting is useful if you are printing to a face-up output bin to achieve
output in the correct order.
prints the document so that page 1 prints first. Back to Front prints the document so that page 1
prints last. The Back to Front setting is useful if you are printing to a face-up output bin to achieve
output in the correct order.
NOTE
The page-ordering operation works on whole sheets of media rather than on
individual logical pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be
greater than one, the ordering of logical pages on a physical sheet of media does not change.
greater than one, the ordering of logical pages on a physical sheet of media does not change.
Paper/Quality tab features
Use the Paper/Quality tab to specify the size, type, and source of the media. You can also use this
tab to indicate different media-selection choices for the front cover, first page, other pages, last page,
and back cover of the document. The following illustration shows the Paper/Quality tab.
tab to indicate different media-selection choices for the front cover, first page, other pages, last page,
and back cover of the document. The following illustration shows the Paper/Quality tab.
184
4 HP PCL 6, HP PCL 5, and HP PS emulation unidrivers for Windows