HP color laserjet 9500mfp Manuale Utente

on the Advanced tab in Document Defaults. The default setting is 100 pixels. You can use the spin
box to change this value to a maximum of 32,767 pixels.

This control specifies the maximum font size (in pixels) for which the driver will download TrueType
fonts as bitmap (Type 3) fonts. A font larger than the maximum setting will be downloaded as an
outline (Type 1) font. Use this option to fine-tune the Automatic setting or override the Send
TrueType as Bitmap setting for the TrueType Font Download option on the Advanced tab in
Document Defaults. The default setting is 600 pixels. You can use the spin box to change this value
to a maximum of 32,767 pixels.

This section provides information to configure the printing options that you can install for the
HP color LaserJet 9500mfp. The following controls are available:

■

■

■

■

■

■

■

■

■

■

Use the Device Settings tab to tell the driver about the hardware configuration of the product. If
bidirectional communication is enabled in a supported environment, set up this tab by selecting the
Update Now setting in the Automatic Configuration setting. The default setting is Off. After an
automatic configuration, the setting returns to Off after the changes are made.

If your environment does not support bidirectional communication, the Update Now setting is
unavailable, so you must manually configure the options on this tab.

This control specifies whether you have Tray 1, an additional 100-sheet multipurpose tray, installed
on your product. The default setting is Installed.

This control specifies whether you have Tray 4, an additional 2000-sheet media tray, installed on
your product. The default setting is Installed.

234

4 HP PCL 6, HP PCL 5, and HP PS emulation unidrivers for Windows