HP designjet 330 Manuale Utente

●

Make sure the HP Bluetooth wireless printer adapter is plugged into the
camera port on the front of the printer. The light on the adapter flashes when
the adapter is ready to receive data.

●

Bluetooth 

 may be set to 

. Change this setting to 

 as follows:

–

Remove any memory cards from the printer memory card slots.

Do not pull out a memory card while the Memory Card

light is flashing.

–

Press 

 to display the printer menu.

–

Select 

, then press 

.

–

Select 

, then press 

.

–

Select 

, then press 

.

●

Bluetooth 

 may be set to 

. Change this setting to 

 as

follows:
–

Remove any memory cards from the printer memory card slots.

Do not pull out a memory card while the Memory Card

light is flashing.

–

Press 

 to display the printer menu.

–

Select 

, then press 

.

–

Select 

, then press 

.

–

Select 

, then press 

.

●

The Passkey (PIN) that the device with Bluetooth wireless technology is
using for the printer may be incorrect. Make sure the correct Passkey for the
printer is entered in the device with Bluetooth wireless technology.

●

You may be too far from the printer. Move the device with Bluetooth wireless
technology closer to the printer. The maximum recommended distance
between the device with Bluetooth wireless technology and the printer is
10 meters (30 feet).

The printer may not recognize the type of file sent by the device with

Bluetooth wireless technology. For a list of the file formats that the printer
supports, see 

The photo you printed may be low resolution. For better results in the

future, set the digital camera to a higher resolution. Be aware that photos taken
with VGA-resolution cameras, such as those found in wireless phones, may not
have high enough resolution to produce a high-quality print.

Chapter 6