HP designjet 330 Manuale Utente

The printing application installed on your device with Bluetooth

wireless technology may not support borderless printing. Contact the vendor of
the device, or go to their support web site to obtain the latest updates for the
printing application.

Before contacting HP Customer Care, read this section for troubleshooting tips or go
to the online support services at 

The following error messages may appear on the printer screen. Follow the
instructions to resolve the problem.

To clear a paper jam, try the following:

●

If the paper came part way through the front of the printer, gently pull the
paper towards you to remove it.

●

If the paper did not come part way through the front of the printer, try
removing it from the back of the printer:
–

Remove the paper from the In tray, then pull down on the In tray to open
it fully to a horizontal position.

–

Gently pull the jammed paper to remove it from the back of the printer.

–

Lift the In tray up until it snaps back into paper-loading position.

●

If you cannot grasp the edge of the jammed paper to remove it, try the
following:
–

Turn off the printer.

–

If the optional HP Photosmart Internal Battery is not installed in the
printer, unplug the printer power cord. Wait about 10 seconds, then plug
the power cord back in.

–

If the optional HP Photosmart Internal Battery is installed in the printer,
unplug the printer power cord, if it is plugged in. Open the battery
compartment cover and remove the battery. Wait about 10 seconds,
then reinstall the battery. If desired, plug in the power cord.

–

Turn on the printer. The printer checks for paper in the paper path and
will automatically eject the jammed paper.

●

Press 

 to continue.

The automatic paper sensor is obstructed or damaged. Try moving

the printer out of direct sunlight, then press 

 and try printing again. If this does

not work, go to 

 or contact HP Customer Care.