HP deskjet 1220c Manuale Utente

 

23

23

23

23    

•  Color print settings may be wrong 

Grayscale might be selected in the HP print settings dialog box.  

•  The wrong printer may be selected 

Make sure the correct printer is selected as the current or default 
printer.  

•  Check your system configuration 

The minimum system configuration for your printer is 486-
66MHz with 24MB RAM. However, the printer performance is 
optimized for Pentium machines. 

•  There may be insufficient hard disk space in your system 

For printing on 11"x17" paper, it is recommended that you should 
have at least 50MB free hard disk space in your system. If you 
are printing graphics-intensive files, make sure you have enough 
(more than 50MB) hard disk space. 

•  For Windows 98, if you are using a parallel connection, try 

switching to a USB connection. For more information, see page 9. 

•  There may be insufficient virtual memory in your system 

Increase the size of your system’s virtual memory. 

•  The PhotoREt option is disabled. If you are printing Best mode on 

letter-sized HP Premium Photo Paper and have disabled the 
PhotoREt option, you need at least 300MB free hard disk space 
in your system, and the printer takes a longer time to print. 

•  The port setting configuration in your system is not set to ECP 

Refer to the manual that comes with your computer for 
information on how to change your port setting or contact your 
computer manufacturer. 

•  A print cartridge may be low on ink  

Replace the low ink print cartridge. 

 

Note: To clear the printer of any jammed paper, open the access cover and pull 
the paper towards you. If you cannot reach the jammed paper, turn the panel