HP deskjet 1220c Manuale Utente

USB Installation Failed or Nothing Prints Through USB
(Windows 98)

• If the installation failed, uninstall the driver and retry the

installation.

• Check that your computer has a USB port and is properly

configured to use USB.

• Check that your computer is running Windows 98.
• Check that the USB cable is properly connected to the computer

and the printer.

• Check that the printer is on.
• Verify that the system detects the printer: In the System control

panel check that you can see USB Hewlett-Packard DeskJets
device name and the DeskJet 1220C printer name below.

Printer Does Not Print After Switching Ports

Important: Do not connect both the parallel cable and the USB cable to the
printer simultaneously. Only use one type of connection to the printer at one
time.

• Make sure the cable you are using is properly connected to the

computer and the printer.

• Make sure the printer is off when you switch ports. If it wasn’t, turn

the printer off then turn the printer on again.

• Check that the port setting matches the physical connection:

Click Start, Settings, Printers. Right click on the printer and
select Properties. Click the Details tab and check the port
setting.

• Print a test page: Click Start, Settings, Printers. Right click on the

printer and select Properties. Click the General tab and Print
Test Page. If the test page prints, make sure the application you
are trying to print from has the correct printer selected.

Aligning the Print Cartridges

The printer automatically aligns the print cartridges whenever you
replace one. If the printout looks like the cartridges are misaligned, you
can align them manually.