HP digital sender 9200c Manuale Di Servizio
Scanner base fan
1
Remove the following items:
●
.
●
Upper flatbed ribbon guide. See
(steps 2 and 3).
2
Disconnect the cable (callout 1) from the right side of the interconnect board.
1
Figure 6-79
Removing the scanner base fan (1 of 2)
3
Remove four clips (callout 2) and unclip two tabs (callout 3).
NOTE
You might have to cut a zip tie in order to release the wires.
2
3
Figure 6-80
Removing the scanner base fan (2 of 2)
4
Remove the scanner base fan.
126
6 Removal and replacement