HP digital sender 9200c Manuale Di Servizio
Power plug
1
Remove the flatbed unit. See
2
Remove one grounding screw and wire (callout 1), unclip four wire clips (callout 2), and
disconnect one connector (callout 3).
disconnect one connector (callout 3).
NOTE
You might have to cut a zip tie in order to release the wires.
1
2
3
Figure 6-81
Removing the power plug (1 of 2)
3
Using a pair of pliers, depress the two tabs and remove the power plug through the hole.
Figure 6-82
Removing the power plug (2 of 2)
Internal components
127