HP digital sender 9200c Manuale Di Servizio
Using HP Web Jetadmin to upgrade the firmware
This procedure requires HP Web Jetadmin Version 7.0 or later to be installed. Complete the
following steps to update a single device through HP Web Jetadmin after downloading the .RFU file
from the HP Web site.
following steps to update a single device through HP Web Jetadmin after downloading the .RFU file
from the HP Web site.
1
Start HP Web Jetadmin.
2
Open the Device Management folder in the drop-down list in the Navigation panel. Navigate to
the Device Lists folder.
the Device Lists folder.
3
Expand the Device Lists folder and select All Devices. Locate the digital sender that you want
to update in the list of devices, and then click to select it.
to update in the list of devices, and then click to select it.
4
Locate the drop-down box for Device Tools in the upper-right corner of the window. Select
Update Printer Firmware from the action list.
Update Printer Firmware from the action list.
5
Click Browse under Upload New Firmware Image and navigate to the location of the .RFU file
that you downloaded from the Web. Select the file.
that you downloaded from the Web. Select the file.
6
Click Upload to move the .RFU file to the correct location on the HP Web Jetadmin server. After
the upload is complete, the browser window refreshes.
the upload is complete, the browser window refreshes.
7
Select the new .RFU date code from the Select New Firmware Version drop-down menu.
8
Click Update Firmware Now. HP Web Jetadmin sends the selected .RFU file to the device. The
digital-sender control panel shows messages that indicate the progress of the upgrade. At the
end of the upgrade process, the digital sender restarts the firmware.
digital-sender control panel shows messages that indicate the progress of the upgrade. At the
end of the upgrade process, the digital sender restarts the firmware.
Upgrading the HP Jetdirect Inside firmware
The HP Jetdirect Inside network interface in the device has firmware that can be upgraded
separately from the digital-sender firmware. This procedure requires HP Web Jetadmin Version 6.2
or greater to be installed. Complete the following steps to update the HP Jetdirect firmware with HP
Web Jetadmin.
separately from the digital-sender firmware. This procedure requires HP Web Jetadmin Version 6.2
or greater to be installed. Complete the following steps to update the HP Jetdirect firmware with HP
Web Jetadmin.
1
Open the Web Jetadmin program.
2
Open the Device Management folder in the drop-down list in the Navigation panel. Navigate to
the Device Lists folder.
the Device Lists folder.
3
Select the device that you want to update.
4
In the Device Tools drop-down list, select Jetdirect Firmware Update.
5
Under Jetdirect firmware version the Jetdirect model number and current firmware version are
listed. Write down this information.
listed. Write down this information.
6
.
7
Scroll down to the list of Jetdirect model numbers and find the model number that you wrote down.
8
Look at the current firmware version for the model, and see if it is later than the version that you
wrote down. If it is, right-click the firmware link and follow the instructions on the Web page to
download the new firmware file. The file must be saved into <drive>: \PROGRAM FILES\HP
WEB JETADMIN\DOC\PLUGINS\HPWJA\FIRMWARE \JETDIRECT on the computer that is
running the HP Web Jetadmin software.
wrote down. If it is, right-click the firmware link and follow the instructions on the Web page to
download the new firmware file. The file must be saved into <drive>: \PROGRAM FILES\HP
WEB JETADMIN\DOC\PLUGINS\HPWJA\FIRMWARE \JETDIRECT on the computer that is
running the HP Web Jetadmin software.
Upgrading the firmware
45