HP laserjet 3390, 3392 all-in-one Manuale Di Servizio
Jams in the straight-through output path
CAUTION
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams.
Damage caused by sharp objects is not covered by the warranty.
When removing jammed media, pull the jammed media straight away from the all-in-one. Pulling
jammed media out of the all-in-one at an angle can damage the all-in-one.
jammed media out of the all-in-one at an angle can damage the all-in-one.
1.
Open the rear output door.
Figure 6-17
Jams in the straight-through output path (1 of 4)
2.
Rotate the green pressure release levers downward.
Figure 6-18
Jams in the straight-through output path (2 of 4)
192
Chapter 6 Troubleshooting
ENWW