HP laserjet 3390, 3392 all-in-one Manuale Di Servizio
Jams in the duplex path
NOTE
If you are experiencing jams in the duplex paper path, make sure that the duplex-tray
lever is set to the correct media size for your country/region. Open the duplex-paper-path door
and look at the embossed arrow on the lever. Make sure that it points to the media size for your
country/region. If the size needs to be changed, push the lever all the way in for duplex printing
on letter- and legal-size media, or pull it all the way out for duplex printing on A4-size media.
and look at the embossed arrow on the lever. Make sure that it points to the media size for your
country/region. If the size needs to be changed, push the lever all the way in for duplex printing
on letter- and legal-size media, or pull it all the way out for duplex printing on A4-size media.
A4
LTR,
LGL
LGL
A4
LTR,
LGL
LGL
CAUTION
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams.
Damage caused by sharp objects is not covered by the warranty.
When removing jammed media, pull the jammed media straight away from the all-in-one. Pulling
jammed media out of the all-in-one at an angle can damage the all-in-one.
jammed media out of the all-in-one at an angle can damage the all-in-one.
1.
Open the rear output door.
Figure 6-21
Jams in the duplex path (1 of 10)
194
Chapter 6 Troubleshooting
ENWW