HP laserjet 1018 Manuale Di Servizio

For optimum performance, do not use paper heavier than 157-g/m 

2

 (42-lb). Paper that is too heavy

might cause misfeeds, stacking problems, jams, poor toner fusing, poor print quality, or excessive
mechanical wear.

●

Smoothness: 135- to 157-g/m

2

 (36- to 42-lb) card stock should have a smoothness rating of

100 to 180 Sheffield. 60- to135-g/m

2

 (16- to 36-lb) card stock should have a smoothness rating

of 100 to 250 Sheffield.

●

Construction: Card stock should lie flat with less than 5 mm (0.2 inch) of curl.

●

Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged.

●

Sizes: Only use card stock within the following size ranges:

●

Minimum: 76 x 127 mm (3 x 5  inches)

●

Maximum: 216 x 356 mm (8.5 x 14  inches)

●

Set margins at least 2 mm (0.08 inch) away from the edges.

20

Chapter 2   Installation and operation

ENWW