HP laserjet 1018 Manuale Di Servizio

Loading media in the HP LaserJet 1018 printer is simple and straightforward.

This section describes loading bulk media.

The main input tray holds up to 150 sheets of 75-g/m

2

 (20-lb) paper or a 25 mm (0.98 inch) stack of

heavier media. Load media with the top forward and the side to be printed on facing up. To prevent
jams and skew, always adjust the side and rear media guides.

Use the priority feed slot to feed a single sheet of a recommended media for manual feeding and
special operations. It can hold up to ten pages of 75-g/m

2

 (20-lb) paper, but is best used for feeding

one sheet at a time of paper, heavier paper (163-g/m

2

 [42-lb]), or card stock, or a single envelope or

transparency. Load media with the top forward and the side to be printed facing up. To prevent jams
and skew, always adjust the side media guides.

If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might occur. See

When you add new media, make sure that you remove all of the media from the input

tray and straighten the stack of new media. This helps prevent multiple sheets of media from
feeding through the printer at one time, and therefore reduces jams.

●

Transparencies and labels:  Load transparencies and labels with the top forward and the side
to be printed facing up. See the user guide for more information.

●

Envelopes:  Load envelopes with the narrow, stamp side forward and the side to be printed
facing up. See the user guide for more information.

●

Letterhead or preprinted forms:  Load with the top forward and the side to be printed facing
up. See the user guide for more information.

●

Cards and custom-sized media: Load with the narrow side forward and the side to be printed
facing up. See the user guide for more information.

ENWW

Loading media

21