HP laserjet 1018 Manuale Di Servizio

Removing the left-side cover is similar to removing the right-side cover. Use the steps and
figures for removing the right-side cover, except start the procedure by examining the tabs on
the left side and removing the screw on the left side.

If the cover cannot be removed easily, release one additional tab that is located

on the bottom of the printer near the center of the cover.

This procedure removes the rear panel and the top-cover assembly (the assembly

consists of the print-cartridge door and the fuser cover).

Remove the following assemblies.

●

Right-side cover. See 

.

●

Left-side cover. See 

.

Open the print-cartridge door.

Remove two screws from the top of the printer (callout 1).

1

  Remove the rear panel and top-cover assembly (1 of 6)

66

Chapter 5   Removal and replacement

ENWW