HP lp145n Manuale Utente

Paper and Other Media

68

Paper thickness

60 - 90.2 g/m

2

 (16 - 24 lb.)

Printer setup

Press the {Menu} key, select [Paper Input] , and then select [Plain Pa-
per]

 for the selected tray's paper type.

Printer driver setup

Click [Plain] or [Plain/Recycled] in the [Paper type:] list.

Enabled paper feeding tray Any input tray can be used.

Number of sheets that can 
be set

• Tray 1, Tray 2: 550

• Tray 3, Tray 4 (Paper Feed Unit PB 3020): 550

• Bypass Tray: 50

• Large Capacity Tray (Large Capacity Tray RT45): 1,500

Make sure paper is not stacked higher than the upper limit mark 
(T) inside the tray. 

Make sure paper is not stacked higher than the paper guides in-
side the bypass tray.

Duplex printing

Possible

Printer setup

• Press the {Menu} key, select [Paper Input], 

and then select [Letterhead] for the selected 
tray's paper type.

Printer driver setup

Select [Letterhead] in the [Paper type:] list.

Duplex Printing

Possible

Paper thickness

91 - 163 g/m

2

 (24 - 43.5 lb.)

(Only for the bypass tray)

Printer setup

Make the following settings using the control panel:

• Press the {Menu} key, select [Paper Input] , and then select [Thick 

 for the bypass tray's paper type.

Printer driver setup

Click [Thick] in the [Paper type:] list.

Enabled paper feeding tray Only the bypass tray can be used.

❒ Make sure paper is not stacked higher than the paper guides 

inside the bypass tray.

Duplex printing

Not possible

Additional cautions

Print speed is slightly slower than when using plain paper.