HP lp145n Manuale Utente

Paper Recommendations

69

Avoid using the following paper as they are not supported by this printer.
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper that is dry enough to emit static electricity

Printer setup

Make the following settings using the control panel:

• Press the {Menu} key, select [Paper Input], and then select [La-

 for the bypass tray's paper type.

Printer driver setup

Click [Labels] in the [Paper type:] list.

Enabled paper feeding tray This paper type can be printed only from the bypass tray.

Make sure paper is not stacked higher than the paper guides in-
side the bypass tray.

Duplex printing

Not possible

Additional cautions

Print speed is slightly slower compared to plain paper.

Printer setup

Make the following settings using the control panel:

• Press the {Menu} key, select [Paper Input], and then select [Trans-

 for the bypass tray's paper type.

Printer driver setup

Click [OHP Transparency] in the [Paper type:] list.

Enabled paper feeding tray This paper type can be printed only from the bypass tray.

Number of sheets that can 
be set

• Bypass Tray: 20

 Make sure paper is not stacked higher than the paper guides in-
side the bypass tray.

Duplex printing

Not possible

Additional cautions

• Print speed for OHP transparencies is slower than for plain pa-

per.

• Due to switching modes, the printer will be on standby for 

thirty or forty seconds after the job was received.

• We recommend that you use a 4000 ANSI lumen or brighter 

overhead projector to project OHP transparencies.