HP officejet d Manuale Utente

Pagina di 70
additional setup information
54
hp officejet d series
If the Microsoft messages did not appear, try the following:
Verify that you are using a high-speed (12 Mbps) USB cable and that 
it does not exceed five meters in length (16.4 feet).
Verify that the computer is USB-ready. For more information about 
determining whether your computer is USB-ready, see your 
computer’s documentation or check with the computer’s 
manufacturer.
Verify that the cable is plugged fully into your HP OfficeJet and 
directly connected to the USB port on your computer. After the cable 
is connected properly, turn your HP OfficeJet off and then on again.
Turn your HP OfficeJet off and then on again, then restart your 
computer.
If the previous steps do not solve the problem, remove and reinstall 
the software. For more information, see remove and reinstall your 
hp officejet software
 on page 57.
If the New Hardware Message appears (Windows 98, 2000, XP, or ME)
If you set up your HP OfficeJet and connect it directly to your computer 
before you install the software, you may encounter one of the following 
messages:
To avoid errors, install the HP OfficeJet software before you connect the 
HP OfficeJet to your computer. If one of the above messages appeared and 
you clicked Next or OK, do the following:
1
Press Esc to exit.
2
Turn off your HP OfficeJet.