HP officejet d Manuale Utente

additional setup information

56

hp officejet d series

Your HP OfficeJet can be shared by two different computers by having both 
computers connected directly to the HP OfficeJet. Both computers must have 
the HP OfficeJet software installed. The list below shows the supported 
combinations of communication between the HP OfficeJet and your 
computers.

The following communication configurations can be used with your 
HP OfficeJet:

•

HP JetDirect 200m print server connector (network) and USB 
(Windows and Macintosh)

•

Parallel cable adapter (parallel) and USB (Windows only)

Connecting to your HP OfficeJet with USB is straightforward. Simply plug 
one end of the USB cable into the back of your computer and the other in 
the back of the HP OfficeJet.

Should you need to disconnect your parallel adapter 
from the HP OfficeJet, press the buttons found on the top 
and bottom of the adapter and pull the adapter straight 
out. You may need to disconnect the power cord to 
access the lower button on the adapter.

Simple Sharing is supported by connecting to the 
HP OfficeJet in one of the following configurations: 
HP OfficeJet to two Windows computers or HP OfficeJet 
to two Macintoshes. You cannot mix platforms, that is, 
you cannot connect the HP OfficeJet to both a Windows 
computer and a Macintosh.

There can be up to 10 client computers on the network 
portion of the 200m print server connector and USB 
combination.

Plugging into the USB port on your 
computer

Plugging into the USB port located 
on the keyboard

Plugging into a powered hub that is 
connected to the USB port on your 
computer

Plugging into a non-powered USB 
hub