HP pavilion f2304 Manuale Utente

Å

WARNING: Burn-in image damage may occur on monitors that 
display the same static image on screen for a prolonged period of 
time. To avoid burn-in image damage on your monitor screen, you 
should always activate a screen saver application or turn off the 
monitor when it is not in use for a prolonged period of time.

There are five signal input connectors: one VGA connector, 
one DVI-I connector, one S-video connector, two RCA audio 
connectors, and a PC Audio In connector. The monitor will 
automatically determine at power-on which inputs have valid 
video signals. The inputs can be selected via the On-Screen 
Display (OSD) feature or by pressing the Input button on the 
monitor’s front bezel.

The video mode supported by the DVI-I connector is 
determined by the video cable used. For digital operation, 
use the DVI-D to DVI-D signal cable provided.

You can remove the monitor base to mount the monitor on a 
wall, swing arm, or other mounting fixture. Read the caution 
and warning statements below before beginning the 
procedure.

Ä

CAUTION: Before beginning to disassemble the monitor, be sure 
the monitor is turned off and the power and all signal cables are 
disconnected.

Å

WARNING: Before removing the base from the monitor, lay the 
monitor flat with the front bezel down. Attempting to remove the 
base from an upright monitor may result in injury to the user.