HP pavilion f2304 Manuale Utente

1. Remove the monitor base. Refer to “Removing the 

Monitor Base” steps in the previous section.

2. With the base is removed, use the four threaded screw 

holes on the monitor panel to mount the monitor. The 

mounting holes are spaced 4 inches (10.2 cm) apart.

✎

Mount the monitor to a swing arm or other mounting fixture 

by following the instructions included with the mounting 

fixture to be used.

On the back of the f2304 monitor there are several 

connectors behind the side panel.
To remove the side panel:

1. Gently pull on the edge of the side panel.
2. Slowly ease the tabs around the side panel out of the tab 

slots as shown in the following illustration.