HP pavilion ze1200_xf300 Manuale Di Servizio
ze1000 Series Troubleshooting and Self-Repair Guide
Troubleshooting and Diagnostics
19
Memory Problems
If a message says you are out of memory
• Make sure drive C is not running low on free space.
• Use the memory troubleshooter in Windows Help and Support.
• If you are having memory problems while running MS-DOS programs, use the application and
• Use the memory troubleshooter in Windows Help and Support.
• If you are having memory problems while running MS-DOS programs, use the application and
software problems troubleshooter in Windows Help and Support.
• Not all third-party memory cards have been tested for use with the notebook. Check the HP
Notebook Web site (www.hp.com/notebooks) for a list of approved and tested memory cards.
• Test your notebook’s memory with the e-DiagTools diagnostics—see “Using the e-DiagTools
Diagnostic Tests” on page 29.
If memory doesn’t increase after adding RAM
• Make sure all RAM modules are installed properly.
• Test your notebook’s memory with the e-DiagTools diagnostics—see “Using the e-DiagTools
• Test your notebook’s memory with the e-DiagTools diagnostics—see “Using the e-DiagTools
Diagnostic Tests” on page 29.
If the notebook will not boot up after adding RAM
• Make sure your notebook is using only PC133 SDRAM modules, or it will not boot up. (You will
also see an error message.)
Modem Problems
If the modem seems slow
• Check for excess static or noise on the line, which reduces the overall transmission speed. If
necessary, contact your telephone company about fixing this type of problem.
• If you’re dialing internationally, line noise is often difficult or impossible to eliminate.
• If you have call-waiting, disable it—see Windows Help and Support, and contact your telephone
• If you have call-waiting, disable it—see Windows Help and Support, and contact your telephone
company for information.
• Eliminate extra connections in the line. If possible, connect directly to the wall jack.
• Try another telephone line, preferably one normally used for a fax machine or modem.
• Try another telephone line, preferably one normally used for a fax machine or modem.
If the modem doesn’t dial or no dial tone is detected
• Check all cables and connections.
• Connect a standard telephone to the phone line and make sure the line is working.
• Make sure someone else isn’t using the same phone line.
• Try another telephone line, preferably one normally used for a fax machine or modem.
• If you’re in a foreign country/region, the dial tone may not be recognized by the modem. Click
• Connect a standard telephone to the phone line and make sure the line is working.
• Make sure someone else isn’t using the same phone line.
• Try another telephone line, preferably one normally used for a fax machine or modem.
• If you’re in a foreign country/region, the dial tone may not be recognized by the modem. Click
Start, Control Panel, Printers and Other Hardware, Phone and Modem Options. Select your
modem on the Modems tab, then click Properties, Modem, and disable the option that waits for a
dial tone.
modem on the Modems tab, then click Properties, Modem, and disable the option that waits for a
dial tone.