HP procurve 2500 Manuale Utente

235

Software Fixes

■

XRMON —

Various XRMON counters display incorrect values. Possible symptoms include

network management applications reporting a too high network utilization (TopTools may
report "crossed octets").

Release F.02.08

(Beta Release Only)

Fixed in F.02.08:

■

Crash —

If a transceiver is repeatedly installed and removed, the switch may crash with a

message similar to:

-> Software exception at woodyDma_recv.c:154 -- in 'eDrvPoll

Release F.02.09

Fixed in F.02.09:

■

Configuration download —

Downloading a configuration file (via TFTP or Xmodem)

sometimes failed to reboot the switch.

■

Isolated Port Groups —

Downloading a configuration file (via TFTP or Xmodem)

containing port isolation commands may fail with error messages similar to:

line: 6. Error setting configuration tree.

Corrupted download file

Release F.02.10

Fixed in release F.02.10:

■

LEDs/Port toggling —

The switch LEDs flash randomly on various ports (even ports that

do not have cables attached) when a 100/1000-T transceiver is installed. Excessive port
toggling may also occur on ports that have cables attached. These problems have been
associated with network management applications such as TopTools.

Release F.02.11

Fixed in release F.02.11

■

Auto-TFTP —

If the switch's configuration file contains STP (i.e., STP is enabled), auto-tftp

does not download a new OS.

■

Transceivers —

Removing and re-inserting both transceivers simultaneously many times

with network cables attached and without an intervening reboot may cause the switch to
crash with a message similar to:

-> Software exception in ISR at buffers.c:1627