HP procurve 2500 Manuale Utente

    236

Release F.02.12

■

 When a config file containing a Monitoring Port configuration is loaded 

onto the switch via TFTP or XModem, the Monitoring Port feature does not work properly.

Release F.02.13

■

 Monitoring Port configuration changes made within a particular switch 

interface (e.g., Web-browser interface), are not correctly displayed within the other switch 
interfaces (e.g., CLI and Menu).

Release F.04.01 

(Beta Release Only)

■

The response to an incomplete trunk configuration command did not produce the 

proper message "Incomplete input: Trunk."

■

The crash history is lost after the "reload" command is performed from the CLI.

■

A transceiver hot-swap may cause the switch to crash with a message similar to:

  -> Software exception at woodyDma_rev.c154 -- in 'eDrv'.

■

A transceiver hot-swap may cause the switch to crash with a message similar to:

   -> Software exception in ISR at buffers.c:1627.

■

The switch may crash with a message similar to:

   -> Software exception at woodyDma_recv.c:154 -- in 'eDrv'.

This crash may occur if both the following conditions exist:

a.

The "reload" CLI command is issued; and

b.

A 100/1000-T transceiver is installed

■

Changing Flow Control setting on a port is not reflected in Auto-

negotiation's advertised capability.

■

Interoperability issues with some Cisco devices cause IGMP groups to be aged out 

of the switch's IGMP tables prematurely.

■

Display of mirror port configuration is inconsistent 

between menu and WEB interface.