HP procurve 2500 Manuale Utente
62
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
Syntax: show port-access authenticator (Syntax Continued)
config [[e] < port-list >]
Shows:
• Whether port-access authenticator is active
• The 802.1X configuration of the ports configured as
• The 802.1X configuration of the ports configured as
802.1X authenticators
If you do not specify
< port-list >, the command lists all ports
configured as 802.1X port-access authenticators. Does not
display data for a specified port that is not enabled as an
authenticator.
display data for a specified port that is not enabled as an
authenticator.
statistics [[e] < port-list >]
Shows:
• Whether port-access authenticator is active
• The statistics of the ports configured as 802.1X
• The statistics of the ports configured as 802.1X
authenticators, including the supplicant’s MAC address,
as determined by the content of the last EAPOL frame
received on the port.
as determined by the content of the last EAPOL frame
received on the port.
Does not display data for a specified port that is not enabled
as an authenticator.
as an authenticator.
session-counters [[e] < port-list >]
Shows:
• Whether port-access authenticator is active
• The session status on the specified ports configured as
• The session status on the specified ports configured as
802.1X authenticators
Also, for each port, the “User” column lists the user name the
supplicant included in its response packet. (For the switch,
this is the
supplicant included in its response packet. (For the switch,
this is the
identity setting included in the supplicant
command—pag
e 59.) Does not display data for a specified
port that is not enabled as an authenticator.