HP procurve 2500 Manuale Utente
61
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
Enhancements in Release F.05.05 through F.05.60
Displaying 802.1X Configuration, Statistics, and Counters
Show Commands for Port-Access Authenticator
802.1X Authentication Commands
802.1X Supplicant Commands
802.1X Open VLAN Mode Commands
802.1X-Related Show Commands
show port-access authenticator
below
show port-access supplicant
Details of 802.1X Mode Status Listings
RADIUS server configuration
Syntax:
show port-access authenticator [[e] < port-list >]
[config | statistics | session-counters]
• Without
[< port-list > [config | statistics | session-counters]],
displays whether port-access authenticator is active (
Yes
or
No) and the status of all ports configured for 802.1X
authentication. The Authenticator Backend State in this
data refers to the switch’s interaction with the
authentication server.
data refers to the switch’s interaction with the
authentication server.
• With
< port-list > only, same as above, but limits port status
to only the specified port. Does not display data for a
specified port that is not enabled as an authenticator.
specified port that is not enabled as an authenticator.
• With
[< port-list > [config | statistics | session-counters]],
displays the
[config | statistics | session-counters] data for the
specified port(s). Does not display data for a specified
port that is not enabled as an authenticator.
port that is not enabled as an authenticator.
• With
[config | statistics | session-counters] only, displays the
[config | statistics | session-counters] data for all ports
enabled as authenticators.
enabled as authenticators.
For descriptions of
[config | statistics | session-counters] refer
to the next section of this table.