HP psc 1200 Manuale Utente
hp psc 1200 series
chapter 6
24
Once you have removed the plastic tape, install the print cartridge
immediately to prevent the ink from drying in the nozzles.
immediately to prevent the ink from drying in the nozzles.
4
Push the new print cartridge into the appropriate slot at a slight angle until
it clicks into place.
it clicks into place.
Caution! Do not attempt to push the cartridge straight into the slot.
It must slide in at a slight angle.
It must slide in at a slight angle.
The tri-color print cartridge goes on the left and the black cartridge goes on
the right.
the right.
5
Close the print cartridge access door.
align cartridges
After you install or replace a print cartridge, the HP PSC automatically prints a
print cartridge alignment sheet. This may take a few moments. Aligning the
cartridges ensures high-quality output.
!
print cartridge alignment sheet. This may take a few moments. Aligning the
cartridges ensures high-quality output.
!
Place the print cartridge alignment sheet on the glass, then press the Scan
button.
The cartridges are aligned correctly.
button.
The cartridges are aligned correctly.
Note: During alignment the button LED will blink until the procedure
completes, which takes about 30 seconds.
completes, which takes about 30 seconds.
self-maintenance sounds
During the life of your product you may hear various mechanical sounds. This is
a normal part of your unit’s self-maintenance.
a normal part of your unit’s self-maintenance.