HP psc 1200 Manuale Utente

25

During the installation of the HP PSC software, a number of windows are 
displayed. You should see the following:

•

Installing

•

Copying files 

•

A request to plug in the HP PSC

•

Green OK and check mark

•

Request to restart your computer (may not occur in all cases)

•

Registration 

If you did not see all of these windows, there may be a problem with the 
installation. Verify the following:

•

The HP Director contains five icons (double-click the HP Director icon on 
the desktop)

•

The HP PSC is listed in the Printers dialog box

•

There is an icon for the HP PSC in the System Tray that indicates the 
HP PSC is ready.

If the HP Director does not show five icons, you may need to wait a few minutes 
for the HP PSC to connect to your computer. 

If nothing appears on your computer screen after you insert the HP PSC 
1200 Series CD-ROM into your computer’s CD-ROM drive

From the Start menu, choose Run.

In the Run dialog box, enter d:\setup.exe (if your CD-ROM drive is not 
assigned to drive letter d, use the appropriate drive letter), then click OK.

If the HP Director does not contain five icons, do the following:

•

Verify that the front-panel overlay is attached, then unplug the HP PSC and 
plug it in again.

•

Verify that the USB and power cables are plugged in.
–

Unplug the USB cable and plug it in again.

–

Do not attach the USB cable to a keyboard or nonpowered hub.

–

Verify that the USB cable is 3 meters or less in length

–

If you have several USB devices attached to your computer, you may 
want to unplug the others during the installation.

Note: AppleTalk is not supported.

•

Unplug the HP PSC from the wall and plug it in again.

•

Restart your computer.