HP qms 4060 Manuale Utente

Engine

QMS 4060 Print System Reference

4-86

Engine 

Through the Administration/Engine menu you can set print engine-
related parameters.

Adjusting the Image Alignment

This option allows you to adjust the horizontal and vertical placement 
of printed images.

To check image alignment, print a standard status page (Print Status 
button). When the printer is placing images properly, the alignment 
angle bar in the lower-left corner of the status page is 0.5"/12.7 mm 
from the left and bottom edges of the page. If the angle bar is off, use 
the Administration/Engine/Image Alignment option to align the image 
horizontally and vertically in pixel increments (1/300" or 0.08 mm). 

Engine constraints may limit the accuracy of pixel alignment.

Horizontal Offset

Vertical Offset

Administration/Engine/Image Alignment/Horiz Offset

000-300 (0.00"/0 mm-1.00"/25.4 mm)

100 (0.33"/.84 mm)

Values above 100 move the image to the right.

Values below 100 move the image to the left.

Administration/Engine/Image Alignment/Vertical 
Offset

000-300 (0.00"-1.00")