Canon i9900, i9950 Manuale Di Servizio
1 - 16
dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised.
<Service mode operation procedures>
1)
With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power
button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
2)
While holding the Power button, release the Resume/Cancel button. (Do not release the Power
button.)
button.)
3)
While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power
and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights
alternately in orange and green, starting with orange.)
and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights
alternately in orange and green, starting with orange.)
4)
When the LED lights in green, press the Resume/Cancel button the specified number of time(s)
according to the function listed in the table below. (Each time the Resume/Cancel button is pressed,
the LED lights alternately in either orange or green, starting with orange.)
according to the function listed in the table below. (Each time the Resume/Cancel button is pressed,
the LED lights alternately in either orange or green, starting with orange.)
5)
After the function (menu) is selected, press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu
selection mode automatically.)
selected function is performed. (When the operation completes, the printer returns to the menu
selection mode automatically.)
Time(s) LED
Function
Remarks
0 times
Green
Power off
When the print head is not installed, the carriage
returns and locks in the home position.
returns and locks in the home position.
1 time
Orange
Service test print
See Section 3.5 Verification Items, (1) Service test
print.
print.
2 times
Green
EEPROM information print
See Section 3.5 Verification Items, (2) EEPROM
information print.
information print.
3 times
Orange
EEPROM initialization
4 times
Green
Waste ink counter resetting
5 times
Orange
Destination settings
After performing step 5), and follow the Destination
settings procedures.
settings procedures.
6 times
Green
Print head deep cleaning
7 times
Orange
Media sensor correction
After performing step 5), and follow the Media sensor
correction procedures.
correction procedures.
8 times
Green
CD-R test print
Not used in servicing
9 times
Orange
CD-R print position
correction (horizontal)
correction (horizontal)
Not used in servicing
10 times
Green
CD-R print position
correction (vertical)
correction (vertical)
Not used in servicing
11 times
or more
or more
Return to the menu selection
<Destination settings procedures>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according
to the destination listed in the table below, and press the Power button.
Time(s) LED
Destination
1 time
Orange
Japan:
PIXUS 9900i
2 times
Green
Overseas, non-support of CD-R printing (A4):
i9900
3 times
Orange
Overseas, non-support of CD-R printing (LTR): i9900 (LTR)
4 times
Green
Overseas, support of CD-R printing (A4):
i9950
5 times
Orange
Overseas, support of CD-R printing (LTR):
i9950 (LTR)
6 times
or more
or more
Return to the menu selection
Note: After setting the destination, confirm the model name in the service test print or EEPROM
information print.
(See Section 3.5 Verification Items, (1) Service test print, or (2) EEPROM
information print.)