Samsung ITP-5021D Manuale Utente

28

27

You can view station key assignments and add extenders to some of the program-
mable keys for easy one touch operation of frequently used features.

An extender is a number that makes an otherwise general key very specific. Add-
ing the digit “4” to a PAGE key defines this key for paging zone four. Adding “225”
to a directed pickup key will define this key as pickup for extension 225 only. The
key must already be assigned by the installing technician.

Use this program to assign extenders to the following keys:

BOSS ..............Boss/Secretary ..............................(1–4)
DP ..................Direct Pickup  ................................(Extension number or

station group number)

DS....................Direct Station ................................(Any extension number)
FWRD ............Call Forwarding ............................(0–7)
GCONF ..........Group Conference  ......................(1–5)
GPIK ..............Group Pick-Up  ..............................(01–20)
IG ....................In/Out of Group  ..........................(Any group number you are part of )
MMPG ..........Meet Me Page  ..............................(0–9, 4)
PAGE ..............Page ................................................(0–9, 4)
PARK ..............Park (orbits) ....................................(0–9)
RP ....................Ring Plan ........................................(1–6), HOLD for none
SPD ................Speed Dialing ................................(00–49, 500–999)
PMSG ............Programmed Messages  ............(01–30)
DIR ..................Directory..........................................PERS (1), SYS (2) or STN (3)
VT....................Voice Mail Transfer ......................Voice Mail Group 

501–529 for the iDCS 500 M
501–549 for the iDCS 500 L

SG....................Station Group ................................501–539 for the iDCS 500 M

501–579 for the iDCS 500 L

UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 107

Display shows the first station

2. Dial the station number (e.g., 205) OR use

UP or DOWN to scroll through the station

numbers and press the right soft key to
move the cursor

3. Enter the key number (e.g., 18) OR use

UP and DOWN to scroll through the keys

and use the right soft key to move the 
cursor OR press the key to be programmed

4. Dial the extender according to the list 

above and the system will display your 
selection
If there are no more entries, press
the left soft key to return to step 2

5. Press TRSF to store and exit programming

OR press SPK to store and advance to the 

next program