Sony dvp-ns999es Manuale Utente
78
ON
OFF
Stores the resume setting in
memory for up to six discs.
(The settings remain in
memory even if you select
OFF.)
memory for up to six discs.
(The settings remain in
memory even if you select
OFF.)
Does not store the resume
setting in memory. Playback
restarts at the resume point
only for the current disc in the
player.
setting in memory. Playback
restarts at the resume point
only for the current disc in the
player.
◆ BOOKMARK RESETt
Resets the bookmarks. Select this and press
ENTER. The “BOOKMARK RESET”
display appears. Press ENTER again to erase
all of the bookmarks in all of the discs.
ENTER. The “BOOKMARK RESET”
display appears. Press ENTER again to erase
all of the bookmarks in all of the discs.
◆ CD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output from the
following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output from the
following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
OFF
ON
Select this when playing CD discs,
including CDs with DTS tracks.
including CDs with DTS tracks.
Eliminates the use of unnecessary
circuits when playing CDs.
circuits when playing CDs.
Note
If you select “ON” when playing CDs with DTS
tracks, the sound will become noisy.
tracks, the sound will become noisy.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the
sound according to the playback and
connection conditions.
sound according to the playback and
connection conditions.
Select “AUDIO SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 73).
The default settings are underlined.
Display. To use the display, see “Using the
Setup Display” (page 73).
The default settings are underlined.
◆ AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
◆ AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
(DVD VIDEO/DVD-RW only)
Allows smaller sounds to be heard at low
volume when playing a DVD that conforms
to “AUDIO DRC.” This affects the output
from the following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
– DIGITAL OUT (OPTICAL or COAXIAL)
volume when playing a DVD that conforms
to “AUDIO DRC.” This affects the output
from the following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
– DIGITAL OUT (OPTICAL or COAXIAL)
jack only when “DOLBY DIGITAL” is set
to “D-PCM” (page 79).
to “D-PCM” (page 79).
OFF
ON
Normally select this position.
Select this when the playback sound
from the speakers is distorted.
from the speakers is distorted.
STANDARD
TV MODE
WIDE
RANGE
RANGE
Normally select this position.
Makes the low sounds clear
even if you turn the volume
down.
even if you turn the volume
down.
Gives you the feeling of
being at a live performance.
being at a live performance.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
DOLBY DIGITAL:
MPEG:
MPEG:
D-PCM
PCM
DTS:
D-PCM
48kHz/96kHz PCM:
48kHz/16bit