Sony dvp-ns999es Manuale Utente
80
• MPEG (DVD VIDEO/DVD-RW only)
Selects the type of MPEG audio signal.
Selects the type of MPEG audio signal.
• DTS (DVD VIDEO only)
Selects the type of DTS signal.
Selects the type of DTS signal.
• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
Selects the sampling frequency of the audio
signal.
Notes
• Even if you set “48kHz/96kHz PCM” to
“96kHz/24bit,” the sampling frequency is
converted to 48kHz/16bit when a
“SURROUND” mode (page 58) is selected.
converted to 48kHz/16bit when a
“SURROUND” mode (page 58) is selected.
• The analog audio signals from the AUDIO OUT
L/R 1/2 jacks and 5.1CH OUTPUT jacks are not
affected by this setting and keep their original
sampling frequency level.
affected by this setting and keep their original
sampling frequency level.
PCM
MPEG
Select this when the player is
connected to an audio
component without a built-in
MPEG decoder.
connected to an audio
component without a built-in
MPEG decoder.
Select this when the player is
connected to an audio
component with a built-in
MPEG decoder.
connected to an audio
component with a built-in
MPEG decoder.
D-PCM
DTS
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
connected to an audio
component without a built-in
DTS decoder.
Select this when the player is
connected to an audio
component with a built-in
DTS decoder.
connected to an audio
component with a built-in
DTS decoder.
48kHz/16bit
96kHz/24bit
The audio signals of DVD
VIDEOs are always
converted to 48 kHz/16 bit.
VIDEOs are always
converted to 48 kHz/16 bit.
All types of signals including
96 kHz/24 bit are output in
their original format.
However, if the signal is
encrypted for copyright
protection purposes, the
signal is only output as
48 kHz/16 bit.
96 kHz/24 bit are output in
their original format.
However, if the signal is
encrypted for copyright
protection purposes, the
signal is only output as
48 kHz/16 bit.
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the
same level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
28).
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the
same level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
28).
You can create two different Speaker Setup
settings, one for Super Audio CDs and one
for all other types of discs.
When nothing is set in “SUPER AUDIO
CD,” the “DVD” setting you have set
becomes effective when you play Super
Audio CDs.
settings, one for Super Audio CDs and one
for all other types of discs.
When nothing is set in “SUPER AUDIO
CD,” the “DVD” setting you have set
becomes effective when you play Super
Audio CDs.
1
Follow steps 1 through 4 of
“Using the Setup Display” (page
73) to select “SPEAKERS SETUP”
in the Setup Display.
“Using the Setup Display” (page
73) to select “SPEAKERS SETUP”
in the Setup Display.
2
Select “DVD” or “SUPER AUDIO
CD” using X/x, then press
ENTER.
CD” using X/x, then press
ENTER.
Example: when “DVD” is selected.
SPEAKER SETUP
SUPER AUDIO CD:
DVD:
SPEAKER SETUP (DVD)
DISTANCE:
LEVEL(FRONT)
LEVEL(FRONT)
:
LEVEL(REAR)
:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
YES
LARGE
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press , then .
To quit, press .
To quit, press .
ENTER
SETUP
.
DISPLAY
SIZE: