Sony dvp-ns999es Manuale Utente

B

D

A

A

C

C

◆ SIZE

Selects the size of the speakers.
• FRONT

• CENTER

• REAR

• SUBWOOFER

• The cut off frequency for the subwoofer is fixed

at 120 Hz.

• If your speakers are too small to reproduce low

bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.

• Even if there are fewer than 6 speakers

connected, the player distributes the audio signal
components to the front speakers.

LARGE

SMALL

NONE

Normally select this position.

Select this when the speaker
cannot reproduce adequate bass
frequencies.

Select this if you do not
connect a center speaker.

LARGE

SMALL

NONE

Normally select this position.

Select this when the speaker
cannot reproduce adequate bass
frequencies.

Select this if you do not
connect rear speakers.

LARGE

SMALL

Normally select this position.

Select this when the speaker
cannot reproduce adequate bass
frequencies.

◆ DISTANCE

Sets the distance from your listening
position to the speakers.
Set the distance to your front speakers in
“FRONT” first (A). Values in “CENTER”
(center speaker), “REAR” (rear speaker),
and “SUBWOOFER” will automatically
change to the same value (B, C and D).
Then, adjust these values to reflect the actual
distance to your centre speaker, rear
speakers, and subwoofer.

Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.

(1~15 m)

(1~15 m)

FRONT
(3 m)

CENTER
(3 m)

REAR (3 m)

SUBWOOFER
 (3 m)

Set this between 1 and 15
metres in 0.05 metre
increments.

Set this within  ±2 metres of
the “FRONT” setting in 0.05
metre increments. For
example, if “FRONT” is set
to 6 metres, “CENTER” can
be set between 4 and 8
metres.

Set this within –5 and +2
metres of the “FRONT”
setting in 0.05 metre
increments. For example, if
“FRONT” is set to 6 metres,
“REAR” can be set between
1 and 8 metres.

Set this within –5 and +2
metres of the “FRONT”
setting in 0.05 metre
increments. For example, if
“FRONT” is set to 6 metres,
“REAR” can be set between
1 and 8 metres.

The default settings are underlined.

Select the item, then press CLEAR. Note
that only the “SIZE” setting does not return
to the default setting.

YES

NONE

Select this if you connect a
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.

Select this if you do not
connect a subwoofer.

,

continued