Panasonic tx-15lv1f Manuale Utente

Your new TV has a programme position ‘0’ to receive RF signals from your VCR, although a Scart connection is
preferable if the VCR is so equipped (see page 6 or 33 for suitable inputs to the Scart socket on this TV).
If your VCR is tuned to a different RF channel, you will not receive any picture or sound. Either adjust the tuning
of the TV’s programme position ‘0’ (follow the instructions below) or adjust the RF channel of your VCR (some
VCRs allow adjustment of their RF channel via their remote control unit) or both until the TV receives the RF
output channel of your VCR.
Refer also to the instruction books for your equipment.

Switch on the VCR, insert and play a pre-recorded tape with known content

   Press 

SET UP

.

   Move to Tuning menu option by using 

 or 

.

3 

  Access Tuning menu by using 

 or 

.

4 

  Move to Manual tuning by using 

 or 

.

5 

  Access Manual tuning by using 

 or 

.

6 

  Select programme position ‘0’ VCR by using 

 or 

.

7 

  Start searching for the VCR playback by using 

 or 

.

When the VCR playback is found, press 

STR

 to store.

 Press 

TV/AV

 to exit.

Notes:
• If picture patterning occurs on programme position ‘0’ it may be

necessary to adjust the RF output channel of the VCR, refer to the
VCR instruction book.

• If a Satellite Receiver and a VCR are going to be used with RF cable

connections set them to different channels.

Refer to the Satellite Receiver and VCR instruction books for precise
tuning information.

VCR

Manual tuning

     21                            68

CH44

VCR

The tape is found and displayed.

Press 

STR

 to store the setting.

0

C

STR

N

TV/ DVD

INDEX

F.P.

TV/ TEXT

HOLD

TV/AV

VCR

ASPECT

SET UP

SOUND

PICTURE