Manualsbrain.com
  1. Manuali
  2. Marche
  3. Panasonic
  4. wj-fs216
  5. Manuale Utente

Panasonic wj-fs216 Manuale Utente

Scarica
Pagina di 30
-12-
2. Press button 15 (SET). The SEQUENCE menu
appears on the monitor.
3. Move the cursor to the sequence number by press-
ing buttons 9-12 (
D
D
, 
C
C
, 
A
A
, 
B
B
).
4. Select the channel by pressing button 13 (
−
) or 14
(+).
5. Move the cursor to the dwell time by pressing but-
ton 12 (
B
B
).
6. Select the desired dwell time by pressing button 13
(
−
) or 14 (+).
If you select OFF for the dwell time, the selected
channel is automatically skipped.
7. Repeat steps 3 to 6 to determine the sequential
order and dwell time.
8. Press button 15 (SET) to finalize the sequential
order.  The display returns to MENU 3 OF 3.
Note:
When monitoring a quad picture, the dwell time
indicated for sequence numbers 1-4 refers to that of
the four quad pictures.
4. START SCREEN
This parameter lets you select a display pattern for
your startup screen.  When the power is turned on,
the picture is displayed in the selected pattern.
1. Move the cursor to the START SCREEN parameter.
2. Select FULL or 1-SEQ.
FULL:
A single picture is displayed.
1-SEQ:
A sequence of a single picture is displayed.
The factory setting is 1-SEQ.
5. SYSTEM MODE
See “Selecting the system mode” on page 6 for set-
tings and procedures.
      * MENU 3 OF 3 *
 BORDER          WHITE
 AUTO SKIP       OFF
 SEQUENCE SETUP *
 START SCREEN    1-SEQ
 SYSTEM MODE    MULTIPLEX
     ** SEQUENCE **
 1 1CH 2S     9   9CH 2S
 2 2CH 2S    10  10CH 2S
 3 3CH 2S    11  11CH 2S
 4 4CH 2S    12  12CH 2S
 5 5CH 2S    13  13CH 2S
 6 6CH 2S    14  14CH 2S
 7 7CH 2S    15  15CH 2S
 8 8CH 2S    16  16CH 2S
Sequence Number
Channel
Dwell Time
     * MENU 3 OF 3 *
 BORDER          WHITE
 AUTO SKIP       OFF
 SEQUENCE SETUP *
 START SCREEN    1-SEQ
 SYSTEM MODE    MULTIPLEX
3. SEQUENCE SETUP
This parameter lets you set the sequential order and
dwell time for camera switching.
1. Move the cursor to SEQUENCE SETUP.