Panasonic wj-fs216 Manuale Utente
-13-
* MENU 1 OF 3 *
AUTO RESET 60S
ALARM BUZZER 2S
ALARM OUTPUT 2S
MULTISCR CH SET *
* MENU 1 OF 3 *
AUTO RESET 60S
ALARM BUZZER 2S
ALARM OUTPUT 2S
MULTISCR CH SET *
** CH SET **
1 1CH 9 9CH
2 2CH 10 10CH
3 3CH 11 11CH
4 4CH 12 12CH
2 2CH 10 10CH
3 3CH 11 11CH
4 4CH 12 12CH
5 5CH 13 13CH
6 6CH 14 14CH
7 7CH 15 15CH
8 8CH 16 16CH
6 6CH 14 14CH
7 7CH 15 15CH
8 8CH 16 16CH
** CH SET **
1 1CH 9 9CH
2 2CH
3 3CH
4 4CH
2 2CH
3 3CH
4 4CH
5 5CH
6 6CH
7 7CH
8 8CH
6 6CH
7 7CH
8 8CH
2
1
2. Select the recover time.
OFF:
The alarm condition is maintained until the
ALARM RESET button on the front panel is
pressed or the alarm recover signal from the
time lapse VTR is supplied to the ALARM/
REMOTE connector.
pressed or the alarm recover signal from the
time lapse VTR is supplied to the ALARM/
REMOTE connector.
1-30, 60S:
The alarm condition is maintained for the
length of the recover time you set. The letter
“S” stands for seconds.
“S” stands for seconds.
The factory setting is 60S.
2. ALARM BUZZER
This item is the same as in MENU 1 OF 3 in the
MULTIPLEX mode. See page 9 for the settings and
procedures.
MULTIPLEX mode. See page 9 for the settings and
procedures.
3. ALARM OUTPUT
This item is the same as in MENU 1 OF 3 in the
MULTIPLEX mode. See page 9 for the settings and
procedures.
MULTIPLEX mode. See page 9 for the settings and
procedures.
4. MULTISCR CH SET
This parameter lets you assign the channel to be
displayed to a specific divided screen.
displayed to a specific divided screen.
1. Move the cursor to CH SET in MULTISCR CH SET.
2. Press button 15 (SET). The CH SET menu appears
on the monitor.
3. Press button 1 (
) or 2 (
) to select the CH
SET menu for MULTISCREEN.
Button 1:
Displays the CH SET menu for quad and
4x4 multiscreen.
4x4 multiscreen.
Button 2:
Displays the CH SET menu for 3x3 multi-
screen.
screen.
4. Move the cursor to the number of the divided
screen by pressing buttons 9-12 (
D
D
,
C
C
,
A
A
,
B
B
).
5. Select the channel number to be assigned to the
selected divided screen by pressing button 13 (
−
)
or 14 (+).
6. Repeat steps 4 and 5 above to assign the other
channels to the divided screens.
7. Press button 15 (SET) to finalize channel assign-
ment. The display returns to MENU 1 OF 3.
A. Setting up MENU 1 OF 3 in
MULTISCREEN mode
1. AUTO RESET
This parameter lets you set the time until the unit
recovers after receiving the alarm signal.
recovers after receiving the alarm signal.
1. Move the cursor to the AUTO RESET parameter.