Yamaha digital mixing studio 01x Manuale Utente

01X   Owner’s Manual

• There may be a limit on the IEEE 1394 interface of your com-

puter as to the number of ports that can be used simultaneously.  
Check how many ports can be used simultaneously.

• Turn off all devices on the mLAN network (except  the com-

puter) and re-connect each device one-by-one until the device 
causing the problem is found.

• (For Windows) (When removing the mLAN bus from the 

[Safely Remove Hardware] setting of the task bar.) Restart the 
computer when using mLAN again.

• With Macintosh notebook computers such as the iBook and 

PowerBook, always first connect the 01X and mLAN cable 
then turn on the power of the 01X, before starting up the com-
puter.

• Make sure that you set up the wordclock correctly. Also, make 

sure that one node is assigned as master and the other nodes are 
assigned as slaves.

........ “mLAN Connection Settings” 

(Graphic Patchbay Online Manual)

■ The mLAN Driver (MIDI/Audio) is not 

• (For Windows) Make sure mLAN has not been turned off. On 

the task bar, right-click mLAN Manager (mLAN icon), then 
select ON. 

........ “Confirming the installation” (Installation Guide), 

“mLAN Connection Settings” (Graphic Patchbay 
Online Manual)

• Make sure the 01X is connected to the mLAN cable and is 

powered on. Start mLAN Auto Connector or mLAN Graphic 
Patchbay, then re-connect the device.

........ “Confirming the installation” (Installation Guide), 

“mLAN Connection Settings” (Graphic Patchbay 
Online Manual)

• (For Macintosh) To use an iBook or PowerBook in the system, 

connect the 01X to the Macintosh using an mLAN cable, turn 
on the power to the 01X, then start the Macintosh.

• Make sure the mLAN settings are correct

........ “The mLAN connection does not work.”

■ The computer processing speed is too 

■ The computer’s CPU meter indicates a 

■ Playback response is delayed.

• Make sure your computer satisfies the system requirements.

........ “System Requirements” (Installation Guide)

• (For Windows) If you do not use the mLAN system, on the task 

bar right-click mLAN Manager (mLAN icon), then select OFF 
(mLAN quits).

........ “Confirming the installation” (Installation Guide)

• Try reducing the number of audio channels in mLAN Auto 

Connector or Graphic Patchbay.

........ “Connecting the Computer and mLAN devices via 

mLAN” (Installation Guide), “mLAN Connection 
Settings” (Graphic Patchbay Online Manual)

• Try increasing the latency value.

........ “Changing the Settings after Installation” 

(Installation Guide)

• (For Macintosh) If a dual-CPU model awakes from Sleep or 

Suspend mode, processing speed may be slowed. In this event, 
restart the computer.

• (For Windows) Refer to “Hints when using 

audio data (Windows).” ..............................Installation Guide

• (For Windows) The condition may improve if you set “Hyper 

Threading” to “Disable.”

• Using mLAN Graphic Patchbay, try reducing the number of 

devices connected to the computer.

.........“mLAN Connection Settings” 

(Graphic Patchbay Online Manual)

• (For Macintosh) Turn off virtual memory.

• (For Macintosh) Disable Apple Talk.

■ Inconsistency in wordclock, or unable to 

• (For Windows) Mobile computers with Intel CPU

SpeedStep™ technology is applied for some CPU’s (CPU for 
notebook PC). Please disable the SpeedStep™ technology 
when mLAN is employed. SpeedStep™ technology changes 
CPU clock dynamically depending on the loading on the CPU 
to save the power consumption.

• How to disable the SpeedStep™ technology;

In almost all of the PC’s, BIOS has a function to select 
enabling or disabling the SpeedStep™ technology. Please 
refer to the PC’s operating manual, or make inquiry to the 
PC manufacturer.

■ Cannot close the applications or shut 

■ Cannot change the mLAN settings.

■ Cannot uninstall (remove) mLAN Applica-

• (For Windows) Is the mLAN (WDM) driver selected as the 

default audio device for the system?

• Select [Start | Control Panel | Sounds and Audio Devices | 

Voice].
Make sure that something other than “mLAN Audio 01” 
is selected for the [Voice playback] and [Voice recording] 
settings.

• Select [Start | Control Panel | Sounds and Audio Devices | 

Audio].
Make sure that something other than “mLAN Audio 01” 
is selected for the [Sound playback] and [Sound record-
ing] settings.

• In “MIDI music playback,” select any option other than 

the range of options from “mLAN MIDI Out” through 
“mLAN MIDI Out (8).”

• (For Windows) Select [Start | Control Panel | Sounds and Audio 

Devices | Sounds]. And select “No sounds” in the [Sound 
scheme], then execute again.

• (For Windows) If you cannot quit mLAN (by selecting “OFF” 

after right clicking the mLAN icon in the task bar), end the 
processes listed below manually. ([Ctrl] + [Alt] + [Delete] 

➝ 

[Processes] 

➝ select process ➝ [End process]) When finished, 

start mLAN Manager to change the mLAN settings again.

• mLANVDevice.exe
• mLANTFamily.exe
• mLANSoftPH.exe
• mLANManager.exe