Extreme networks Summit1 Manuale Utente
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
14-5
B
OOT
O
PTION
C
OMMANDS
B
OOT
O
PTION
C
OMMANDS
lists the commands associated with Summit boot options.
Table 14-1: Boot Option Commands
Command
Description
show config
Displays the current switch configuration to the
terminal. You can then capture the output and
store it as a file.
terminal. You can then capture the output and
store it as a file.
download config <ipaddress> <filename>
Downloads a previously saved ASCII
configuration file from a specific IP host.
configuration file from a specific IP host.
download image [xmodem | <ipaddress>
<filename>] {primary | secondary}
<filename>] {primary | secondary}
Downloads a new image by way of XMODEM
using the serial port, or from a TFTP server
over then network. If no parameters are
specified, the image is saved to the current
image.
using the serial port, or from a TFTP server
over then network. If no parameters are
specified, the image is saved to the current
image.
reboot {<date> <time> | cancel}
Reboots the switch at the date and time
specified. If you do not specify a reboot time,
the reboot happens immediately following the
command, and any previously scheduled
reboots are cancelled. To cancel a previously
scheduled reboot, use the
specified. If you do not specify a reboot time,
the reboot happens immediately following the
command, and any previously scheduled
reboots are cancelled. To cancel a previously
scheduled reboot, use the
cancel
option.
save {config} {primary | secondary}
Saves the current configuration of the switch to
NVRAM. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the configuration
area currently in use.
NVRAM. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the configuration
area currently in use.
upload config <ipaddress> <filename> {every
<time> | cancel}
<time> | cancel}
Uploads the current runtime configuration to
the specified TFTP server. If
the specified TFTP server. If
every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at
the specified time. To cancel automatic
upload, use the
configuration to the server once per day, at
the specified time. To cancel automatic
upload, use the
cancel
option. If no options
are specified, the current configuration is
uploaded immediately.
uploaded immediately.
use config {primary | secondary}
Configures the switch to use a particular
configuration on the next reboot. Options
include the primary configuration area, or the
secondary configuration area. If not specified,
the switch uses the primary configuration area.
configuration on the next reboot. Options
include the primary configuration area, or the
secondary configuration area. If not specified,
the switch uses the primary configuration area.
use image [primary | secondary]
Configures the switch to use a particular image
on the next reboot.
on the next reboot.
Summit.bk : 14BOOT.FM Page 5 Thursday, June 18, 1998 9:27 AM