Extreme networks Summit1 Manuale Utente

S

UMMIT

 S

WITCH

 I

NSTALLATION

 

AND

 U

SER

 G

UIDE

2-3

I

NSTALLING

 

THE

 S

UMMIT

For more information on 1000BASE-SX and 1000BASE-LX link characteristics, 
refer to IEEE Draft P802.3z/D4.2, Table 38-2 and Table 38-6.

I

NSTALLING

 

THE

 S

UMMIT

The Summit can be mounted in a rack, or placed free-standing on a tabletop.

The switch is 2U high and will fit in most standard 19-inch racks.

The rack mount kits must not be used to suspend the switch from under a table 
or desk, or attach it to a wall.

To rack mount the Summit, follow these steps:

Place the switch the right way up on a hard flat surface, with the front facing toward 
you.

Remove the existing screws from the sides of the chassis and retain for Step 4.

Locate a mounting bracket over the mounting holes on one side of the unit.

Insert the four screws and fully tighten with a suitable screwdriver, as shown in 

Figure 2-1: Fitting the mounting bracket

Summit.bk : 2INSTALL.FM  Page 3  Thursday, June 18, 1998  9:27 AM