Adam Equipment 8509 Manuale Utente
© Adam Equipment Company 2010
25
11.1 INPUT COMMANDS FORMAT
The scale can be controlled with the following commands. Press the [Enter]
key of the PC after each command.
key of the PC after each command.
T<cr><lf>
Tares the scale to display the net weight. This is the same
as pressing [Tare].
as pressing [Tare].
Z<cr><lf>
Sets the zero point for all subsequent weighing. The display
shows zero.
shows zero.
P<cr><lf>
Prints the results to a PC or printer using the RS-232
interface. It also adds the value to the accumulation memory
if the accumulation function is not set to automatic.
interface. It also adds the value to the accumulation memory
if the accumulation function is not set to automatic.